 |
||||
 |
 |
 |
 |
|
Phone: (203) 294-4440
Fax: (203) 294-7899
sales@dexmet.com
22 Barnes Industrial Rd. So.
Wallingford, CT 06492
United States of America
29th International Battery Seminar & Exhibit
March 12-14, 2012
Broward County Convention CTR, Fort Lauderdale, FL - Booth# 28
JEC Europe Composite Shows & Conferences
March 27-29, 2012
Porte de Versailles, Paris, France - Booth# M63
Heating Elements with MicroGrid® Precision Expanded Foils
Electric Heating Elements
Dexmet has been producing heating elements in a variety of materials for many years. The most common materials are INCO 600, Nickel, Copper and Kanthal, however since we expand all ductile materials, we can create a configuration for you in most any metal.
The typical resistance range is between 0.006 to 2.0 Ohms per square. The most common uses for our heating elements are drum heaters, toasters and de-icing elements. |
Technical References
Dexmet provides expanded metal for use in a wide variety of electrical heating applications. Like all resistive heating elements, they function according to Ohm's Law V = i2R and are therefore sometimes referred to as "Ohmic heaters". Expanded metal is frequently used in fluid flow heaters, where the liquid or gas to be heated passes through an expanded metal network. Dexmet's precision controlled geometry assures repetitive results. Expanded metal may also be used in strip heaters, where the designer wants to spread out the thermal energy over a wide area. For more information call our technical support team or access |
Design Factors
Design factors coming soon |
Charts
Charts coming soon |
Home | About Us | Products | Applications | Technology | Markets Served | Contact Us
© 2010 Dexmet Corporation. Site Map | Corporate Reach Policy
22 Barnes Industrial Road South • Wallingford, CT 06492 • United States of America
Phone: (203) 294-4440 • Fax: (203) 294-7899